Table of Contents
Advertisement
S
O
DXM1200-B
YSTEM
VERVIEW FOR THE
Table 4:Modbus registers for the LCD board (Modbus ID 201)
Modbus Register
1102 : bit 0
1103 : bit 0
1104 : bit 0
1105: bit 0
1105: bit 0
Modbus Registers for the ISM Radio (Modbus ID 1)—See
Registers for the Performance Gateway Radio Module on page
1.5. DXM Configuration Software
Download the latest version of all configuration software from http://www.bannerengineering.com. For more information on using the DXM
Configuration Software, refer to the instruction manual (p/n 209933).
The DXM Configuration Software configures the DXM1200 by creating an XML file that is transferred to the DXM1200 using an Ethernet
connector or the internal micro USB connection. The DXM1200 can also receive the XML configuration file from a Web server using a cellular
or Ethernet connection.
This configuration file governs all aspects of the DXM1200 operation.
The wireless network devices are a separate configurable system. Use the DX80 User Configuration Software to configure the internal DX80
wireless Gateway and the attached wireless Nodes. Use the MultiHop Configuration Software if the internal radio is a MultiHop device.
All tools can be connected to the DXM1200 using an Ethernet connection or the internal micro USB.
1.6. Dimensions
All measurements are listed in millimeters, unless noted otherwise.
6
X
LED
LED 1
LED 2
LED 3
LED 4
Backlight
Modbus Registers for the MultiHop Radio Board Module on page 16
DXM Configuration Software
Local Registers
Register Mapping
Action Rules
Scheduler
Script Basic
System
Settings
XML Config File
Figure 5: Overview of the DXM Configuration Software features
© Banner Engineering Corp. www.bannerengineering.com
Color
Red
Green
Blue
Amber
17.
Register
View Utility
Internal Micro
USB
Ethernet
State
1 = On
0 = Off
and
Modbus
Advertisement
Table of Contents
