Banner SCR P Series Instruction Manual page 125

Registers (40000) using Modbus function code 03 (Read Holding Registers). The status information for all the virtual outputs
and their fault flags, contained in the first 8 registers, can also be read as Inputs (10000) using Modbus function code 02
(Read Input Status).
Note: FID 2 and later XS/SC26-2 Safety Controllers differ from FID 1 XS/SC26-2 models in that FID 2 and
later no longer allows access to the first 64 Virtual Outputs using Modbus/TCP Coils 0001–00064, nor the
first 64 Virtual Output Faults bits using Modbus/TCP Coils 00065–00128.
The First 64 Virtual Outputs and Virtual Output Faults (Inputs 10001-10128)
Table 17: 02: Read Input Status
Input #
10001
10002
10003
...
10063
10064
NAME
VO1
VO2
VO3
...
VO63
VO64
www.bernstein.eu
Programmable Safety Controller SCR P
Input #
10065
10066
10067
...
10127
10128
- Tel: + 49 571 793 0
NAME
VO1 Fault bit
VO2 Fault bit
VO3 Fault bit
...
VO63 Fault bit
VO64 Fault bit
125