Dxm Configuration Software - Banner Sure Cross DXM1200-Bx Instruction Manual

®
Sure Cross DXM1200-Bx Wireless Controller
Modbus Registers for Internal Local Registers (Modbus Slave ID 199)
Local Registers Type
7001–8000 32-bit non-volatile integer
> 10000
Modbus Registers for the LCD Board (Modbus Slave ID 201)
Modbus Register
1102 : bit 0
1103 : bit 0
1104 : bit 0
1105: bit 0
1105: bit 0
Modbus Registers for the ISM Radio (Modbus Slave ID 1)—See
p. 18 and Modbus Registers for the Performance Gateway Radio Module

1.4 DXM Configuration Software

Download the latest version of all configuration software from http://www.bannerengineering.com. For more information on
using the DXM Configuration Software, refer to the instruction manual (p/n 209933).
The DXM Configuration Software configures the DXM1200 by creating
an XML file that is transferred to the DXM1200 using an Ethernet
connector or the internal micro USB connection. The DXM1200 can
also receive the XML configuration file from a Web server using a
cellular or Ethernet connection.
This configuration file governs all aspects of the DXM1200 operation.
The wireless network devices are a separate configurable system. Use
the DX80 User Configuration Software to configure the internal DX80
wireless Gateway and the attached wireless Nodes. Use the MultiHop
Configuration Software if the internal radio is a MultiHop device.
All tools can be connected to the DXM1200 using an Ethernet
connection or the internal micro USB.
8
Description
Data flash, non-volatile
Read only virtual registers, system-level data
LED
LED 1
LED 2
LED 3
LED 4
Backlight
Modbus Registers for the MultiHop Radio Board Module
www.bannerengineering.com - Tel: + 1 888 373 6767
Color
Red
Green
Blue
Amber
on p. 18.
DXM Configuration Software
Local Registers
Register Mapping
Action Rules
Scheduler
Script Basic
System
Settings View Utility
XML Config File
Figure 4. Overview of the DXM Configuration Software
features
State
1 = On
0 = Off
on
Register
Internal Micro
USB
Ethernet