Nortel Meridian 1 option 11C Planning And Installation Manual page 356

3DJH#689#RI#699 #&KDSWHU#56#±#&KDQJLQJ#SUH0SURJUDPPHG#GDWD
&UHDWLQJ#DQDORJ#WHOHSKRQH#PRGHOV
0RGLI\LQJ#DQDORJ#PRGHO#WHOHSKRQHV
886063540543 6WDQGDUG#8133
The following information must be entered in LD 10 in order to create an
analogue (500/2500- type) telephone model:
/' 43
REQ NEW
TYPE 500 M
MODL YYY "YYY" = the model number of the
telephone that you are creating
Enter responses to the remaining prompts in order to complete the new model.
(Refer to the Option 11C Software Input/Output guides for a complete list of
prompts and possible responses).
If you want to modify an analog telephone, use LD 10 and type in the
following commands on the TTY:
/' 43
REQ CHG
TYPE 500 M
MODL YYY "YYY" = the model number of the telephone that you are
modifying
For more information about LD 10 and its associated prompts and
commands, refer to the Option 11 Software Guides that are shipped with the
system.
$SULO#5333