How To Import Zywall/Usg Certificate For L2Tp Over Ipsec In Windows 10; Set Up The L2Tp Vpn Tunnel On The Zywall/Usg - ZyXEL Communications VPN Series Handbook

How to Import ZyWALL/USG Certificate for L2TP over IPsec in
Windows 10
This is an example of using the L2TP VPN and VPN client software included in
Windows 10 operating systems. When the VPN tunnel is configured, users can
securely access the network behind the ZyWALL/USG and allow traffic from L2TP
clients to go to the Internet from a Windows 10 computer.
ZyWALL/USG L2TP VPN with Remote Windows 10 Client Example
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This example
was tested using USG310 (Firmware Version: 4.25) and Windows 10 Pro (Version: 10.0.10240)

Set Up the L2TP VPN Tunnel on the ZyWALL/USG

In the ZyWALL/USG, go to Quick Setup > VPN Setup Wizard, use the VPN Settings
for L2TP VPN Settings wizard to create a L2TP VPN rule that can be used with the
Window 10 clients. Click Next.
Quick Setup > VPN Setup Wizard > Welcome
www.zyxel.com
280/810