Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This example
was tested using USG310 (Firmware Version: ZLD 4.25).
Set Up the WiFi Guest Account, Address Range and Service
Rule on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Object > User/Group > User > Add A
User to configure the User Name the guest Wi-Fi user and set User Type to guest.
Set a secured Password (4-31 characters) and enter it again for confirmation.
www.zyxel.com
682/810