Table of Contents
Advertisement
www.zyxel.com
address range of the network connected to the ZyWALL/USG (Address Object
created in Step 1)
VPN > Site-to-site > IPsec Policies > Basic Settings
Then, go to Advanced Settings enable PFS and DPD if you enable both options in
the ZyWALL/USG. Set IKE Policy to be the IKE Policy created in Step 2 (found
under IKE Policy Link); set Transform to be the Transform Set created in Step 3
(found under Transform Link) and SA-Lifetime to be 24 hours.
Click OK. The connection active dialog box appears. Click Activate Connection.
VPN > Site-to-site > IPsec Policies > Advanced Settings
206/810
Advertisement
Table of Contents
