Table of Contents
Advertisement
Set up authentication for 2 factor VPN connection
In the ZyWALL/USG, go to CONFIGURATION > Object > Auth.Method > Two-factor
Authentication.
1.
Select the check box "Enable" to enable 2 factor authentications.
2.
Enter the maximum time (in minutes) that the user must click or tap the
authorization link in the SMS or email in order to get authorization for the VPN
connection.
3.
Select which kinds of VPN tunnels require Two-Factor Authentication. in this
scenario, we enable 2 factor authentication on IPSec VPN Access
4.
This list displays the names of the users and user groups that can be selected for
two-factor authentication.
5.
Use this section to configure how to send an SMS or email for authorization.
We select both methods in this scenario.
6.
Configure the link that the user will receive in the SMS or email. The user must be
able to access the link.
7.
You can either create a default message in the text box or upload a message
file (Use Multilingual file) from your computer.
8.
Click "Apply" button to save your changes to the Zyxel Device.
www.zyxel.com
320/810
Advertisement
Table of Contents
