Table of Contents
Advertisement
CONFIGURATION > VPN > IPSec VPN > VPN Connection > Connect
10
Go to CONFIGURATION > Network > Interface > VTI. You will see that the
status of the VTI is up when the corresponding VPN tunnel is established.
CONFIGURATION > Network > Interface > VTI
Test the IPSec VPN Tunnel
1
To test whether or not a tunnel is working, ping from a PC in LAN1 of USG1
to a PC in LAN1 of USG2 and vice versa.
PC of USG1 (192.168.1.34) > Window 7 > cmd > ping 192.168.11.33
www.zyxel.com
409/810
Advertisement
Table of Contents
