Table of Contents
Advertisement
www.zyxel.com
After disconnecting both wan1 and wan2, you can see both wan1 and wan2
Status are Down and no traffic goes through these two interfaces. The backup
cellular1 Status is connected and all the traffic is going through this interface.
MONITOR > Interface Status > Interface Statistics
What Could Go Wrong?
If there is no traffic going through cellular interface when other interfaces are
down, please make sure you have a compatible mobile broadband device
installed or connected. Go to
http://www.zyxel.com/support/download_landing.shtml and see the 3G Dongle
Document to check the compatible mobile broadband devices. Also, make sure
the cellular interface is enabled and the cellular interface has the correct user
name, password, and PIN code configured with the correct casing.
662/810
Advertisement
Table of Contents
