ZyXEL Communications VPN Series Handbook page 269

www.zyxel.com
Then, configure the Rule Name and set My Address to be the wan1 interface
which is connected to the Internet. Type a secure Pre-Shared Key (8-32
characters).
Quick Setup > VPN Setup Wizard > Welcome > VPN Settings
Assign the remote users IP addresses range from 192.168.100.10 to 192.168.100.20
for use in the L2TP VPN tunnel and check Allow L2TP traffic Through WAN to allow
traffic from L2TP clients to go to the Internet. Click Next.
269/810