ZyXEL Communications VPN Series Handbook page 346

www.zyxel.com
Go back to Configuration and click Connect.
Test the L2TP over IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, the
Status connect icon is lit when the interface is connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and the Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to
verify the result of ICMP Connectivity.
MONITOR > VPN Monitor > IPSec > WIZ_L2TP_VPN
346/810