ZyXEL Communications VPN Series Handbook page 211

Security firewalls

Table of Contents

How to Configure Site-to-site IPSec VPN with a SonicWALL

This example shows how to use the VPN Setup Wizard to create a site-to-site VPN

between a ZYWALL/USG and a SonicWALL router. The example instructs how to

configure the VPN tunnel between each site. When the VPN tunnel is configured,

each site can be accessed securely.

ZyWALL/USG Site-to-site IPSec VPN with SonicWALL

Note: All network IP addresses and subnet masks are used as examples in this article.

Please replace them with your actual network IP addresses and subnet masks. This example

was tested using USG310 (Firmware Version: ZLD 4.25) and NSA240 (Firmware Version:

SonicOS Enhanced 5.8.0.1-31o)

www.zyxel.com