Set Up The Nat Router (Using Zywall Usg Device In This Example) - ZyXEL Communications VPN Series Handbook

Security firewalls

Table of Contents

www.zyxel.com

Go to CONFIGURATION > VPN > L2TP VPN > Create new Object > User to add

User Name and Password (4-24 characters). Then, set Allowed User to the newly

created object (L2TP_Remote_Users/zyx168 in this example).

CONFIGURATION > VPN > L2TP VPN > Create new Object > User

Set Up the NAT Router (Using ZyWALL USG device in this

Go to CONFIGURATION > Network > NAT > Add. Select the Incoming Interface

on which packets for the NAT rule must be received. Specified the User-

Defined Original IP field and Type the translated destination IP address that this

NAT rule supports.