Set Up The L2Tp Vpn Tunnel On The Windows 10 - ZyXEL Communications VPN Series Handbook

Security firewalls

Table of Contents

www.zyxel.com

Set Up the L2TP VPN Tunnel on the Windows 10

To configure L2TP VPN in Windows 10 operating system, go to Start > Settings >

Network & Internet > VPN > Add a VPN Connection and configure as follows.

VPN Provider set to Windows (built-in).

Configure Connection name for you to identify the VPN configuration.

Set Server name or address to be the ZyWALL/USG's WAN IP address

(172.124.163.150 in this example).

Select VPN type to Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec).

Enter User name and Password which the same as Allowed User created in

ZyWALL/USG (L2TP_Remote_Users/zyx168 in this example).