Table of Contents
Advertisement
www.zyxel.com
Set the Authentication Timeout Settings to be Use Manual Settings to enter the
number of minutes this user has to renew the current session before the user is
logged out.
CONFIGURATION > Object > User/Group > User > Add A User
In the ZyWALL/USG, go to CONFIGURATION > Object > Address > Add Address
Rule to create the guest Wi-Fi user access subnet. In this example, AP is
connected to ZyWALL/USG LAN interface 192.168.2.0/24. Configure the Name for
you to identify the Wi-Fi guest subnet. Set the Network to be 192.168.2.0 and set
the Netmask to be 255.255.255.0. Click OK.
CONFIGURATION > Object > Address > Add Address Rule
In the ZyWALL/USG, go to CONFIGURATION > Object > Service > Service Group >
683/810
Advertisement
Table of Contents
