ZyXEL Communications VPN Series Handbook page 627

Security firewalls

Table of Contents

www.zyxel.com

Enable BWM and Enable Highest Bandwidth Priority for SIP Traffic.

CONFIGURATION > BWM > BWM Global Settings > Enable BWM

Set Up the Bandwidth Management for P2P on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION > BWM > Configuration > Add Policy,

select Enable and type P2P Any-to-WAN as the policy's Description.

Leave the Incoming Interface to any and select the Outgoing Interface to be

WAN1. Select Service Type to be the Application Object and select P2P from the

Set the Guaranteed Bandwidth Inbound to 100 (kbps) and set Priority 5. Set the

Maximum to 150 (kbps). Set the Guaranteed Bandwidth Outbound to 100 (kbps)

and set Priority 5. Set the Maximum to 150 (kbps). Click OK to return to the

General screen.