ZyXEL Communications VPN Series Handbook page 713

Security firewalls

Table of Contents

If you see [alert] log message shown as below, the Wi-Fi guest traffic failed. Please

make sure you enable Web Authentication and check your AD server is working

Monitor > Log

Note: The default setting of Security Policy is without log notification (except

PolicyDefault), if you want to check which policy may potentially block the traffic, please

select this policy and set the Log matched traffic to be log or log alert.

How to Set Up IPv6 Interfaces for Pure IPv6 Routing

This example shows how to configure your ZyWALL/USG WAN and LAN interfaces

which connects two IPv6 networks. ZyWALL/USG periodically advertises a network

prefix of 2002:1111:1111:1111::/64 to the LAN through router advertisements.

ZyWALL/USG with Pure IPv6 Network Example

www.zyxel.com