ZyXEL Communications VPN Series Handbook page 195

Security firewalls

Table of Contents

www.zyxel.com

PC behind ZyWALL/USG > Window 7 > cmd > ping 192.168.10.33

PC behind WatchGuard> Window 7 > cmd > ping 192.168.1.33

What Could Go Wrong?

If you see below [info] or [error] log message, please check ZyWALL/USG Phase 1

Settings. Both ZyWALL/USG and WatchGuard must use the same Pre-Shared Key,

Encryption, Authentication method, DH key group and ID Type to establish the

MONITOR > Log

If you see that Phase 1 IKE SA process done but still get below [info] log message,