Table of Contents
Advertisement
www.zyxel.com
Defined Original IP field and Type the translated destination IP address that this
NAT rule supports.
CONFIGURATION > Network > NAT > Add
Go to CONFIGURATION > Security Policy > Policy Control. IP forwarding must be
enabled at the firewall for the following IP protocols and UDP ports:
IP protocol = 50 → Used by data path (ESP)
IP protocol = 51 → Used by data path (AH)
UDP Port Number = 500 → Used by IKE (IPSec control path)
UDP Port Number = 4500 → Used by NAT-T (IPsec NAT traversal)
95/810
Advertisement
Table of Contents
