Table of Contents
Advertisement
www.zyxel.com
GatewaySubnet. You should not name it anything else, or the gateway will not
work. Add the IP Address range for your gateway. Click OK at the bottom of the
blade to create the subnet.
VPN Vnet_to_USG > Settings > Subnet > Add subnet
In the portal, go to New, then Networking. Select Virtual network gateway from
the list. On the Create virtual network gateway blade Name field, name your
gateway. Next, choose the Virtual network that you want to deploy this gateway
to.
Click the arrow (>) to open the Choose public IP address blade. Then click Create
New to open the Create public IP address blade. Input a Name for your public IP
address. Note that this is not asking for an IP address. The IP address will be
assigned dynamically. Rather, this is the name of the IP address object that the
address will be assigned to. Click OK to save your changes.
41/810
Advertisement
Table of Contents
