To Close The Indoor Unit; Mounting The Outdoor Unit; About Mounting The Outdoor Unit - Daikin EAVH16S23DA6V Installer's Reference Manual

7.2.7 To close the indoor unit

7.3 Mounting the outdoor unit

7.3.1 About mounting the outdoor unit

EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09
1
3 Place the switch box lower on the unit. Use the 2 hinges located lower on the
unit.
1 Close the cover of the switch box.
2 Put the switch box back into place.
3 Reinstall the top panel.
4 Reinstall the side panels.
5 Reinstall the front panel.
6 Reconnect the cables to the user interface panel.
7 Reinstall the user interface panel.
NOTICE
When closing the indoor unit cover, make sure that the tightening torque does NOT
exceed 4.1 N•m.
When
You have to mount the outdoor unit before you can connect the water piping.
2×
T25
7 Unit installation
|
Installer reference guide
65