Daikin EAVH16S23DA6V Installer's Reference Manual page 133

EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09
4
See "Setpoint mode" [
# Code
[3.4] N/A
Heating WD curve
Set weather-dependent heating for the additional zone (if [3.4]=1 or 2):
# Code
[3.5] [0-00]
[0-01]
[0-02]
[0-03]
Cooling WD curve
Set weather-dependent cooling for the additional zone (if [3.4]=2):
124].
Setpoint mode:
▪ Fixed
▪ WD heating, fixed cooling
▪
Weather dependent
Set weather-dependent heating:
T t
[0-01]
[0-00]
[0-03]
▪ T : Target
t
(additional zone)
▪ T : Outdoor temperature
a
▪ [0-03]: Low outdoor ambient temperature. –
40°C~+5°C
▪ [0-02]: High outdoor ambient temperature.
10°C~25°C
▪ [0-01]: Desired leaving water temperature
when the outdoor temperature equals or drops
below the
[9‑05]°C~[9‑06]°C
Note: This value should be higher than [0‑00]
as for low outdoor temperatures warmer water
is required.
▪ [0-00]: Desired leaving water temperature
when the outdoor temperature equals or rises
above the
[9‑05]~min(45, [9‑06])°C
Note: This value should be lower than [0‑01] as
for high outdoor temperatures less warm water
is required.
10 Configuration
|
Description
Description
[0-02]
T a
leaving water temperature
low ambient temperature.
high ambient temperature.
Installer reference guide
133