Daikin EAVH16S23DA6V Installer's Reference Manual page 159

Power consumption control
EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09
Allowed heaters during preferential kWh rate power supply
[D‑00] Booster heater
0 Forced OFF
1 Permitted
2 Forced OFF
3 Permitted
Allowed heaters during preferential kWh rate power supply
Do NOT use 1 or 3.
[D‑00]
0
2
Power consumption control
See "6 Application guidelines" [
functionality.
#
[9.9.1] [4-08]
[9.9.2] [4-09]
Limit when [9.9.1]=Continuous and [9.9.2]=Amp:
#
[9.9.3] [5-05]
Limits when [9.9.1]=Inputs and [9.9.2]=Amp:
#
[9.9.4] [5-05]
[9.9.5] [5-06]
[9.9.6] [5-07]
[9.9.7] [5-08]
Backup heater
Forced OFF
Permitted
Backup heater
Forced OFF
Allowed
4
30] for detailed information about this
Code
Power consumption control:
▪ 0 No: Disabled.
▪ 1 Continuous: Enabled: You can set one
power limitation value (in A or kW) to which
the system power consumption will be
limited for all the time.
▪ 2 Inputs: Enabled: You can set up to four
different power limitation values (in A or kW)
to which the system power consumption will
be limited when the corresponding digital
input asks.
Type:
▪ 0 Amp: The limitation values are set in A.
▪ 1 kW: The limitation values are set in kW.
Code
Limit: Only applicable in case of full time
current limitation mode.
0 A~50 A
Code
Limit 1: 0 A~50 A
Limit 2: 0 A~50 A
Limit 3: 0 A~50 A
Limit 4: 0 A~50 A
10 Configuration
|
Compressor
Forced OFF
Compressor
Forced OFF
Description
Description
Description
Installer reference guide
159