To Connect The Electricity Meters; To Connect The Domestic Hot Water Pump; To Connect The Alarm Output - Daikin EAVH16S23DA6V Installer's Reference Manual

9.3.4 To connect the electricity meters

9.3.5 To connect the domestic hot water pump

9.3.6 To connect the alarm output

EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09
INFORMATION
In case of an electricity meter with transistor output, check the polarity. The positive
polarity MUST be connected to X5M/6 and X5M/4; the negative polarity to X5M/5
and X5M/3.
1 Connect the electricity meters cable to the appropriate terminals as shown in
the illustration below.
X1M
2 Fix the cable with cable ties to the cable tie mountings.
1 Connect the domestic hot water pump cable to the appropriate terminals as
shown in the illustration below.
M
M2P
1~
1 2
X1M
2 Fix the cable with cable ties to the cable tie mountings.
1 Connect the alarm output cable to the appropriate terminals as shown in the
illustration below.
b
7 9
X1M
a Installation of EKRP1HBAA is required.
S3S S2S
X2M
3 4 56
X5M
X2M
X5M
X2M
X5M
YC
Y1
A4P
9 Electrical installation
|
a
Installer reference guide
95