To Remove The Transportation Stay - Daikin EAVH16S23DA6V Installer's Reference Manual

4.2.4 To remove the transportation stay

EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09
2×
a b
1× 1×
RXXX
a Outdoor unit installation manual
b Fluorinated greenhouse gases label
c Multilingual fluorinated greenhouse gases label
d Shut-off valve (with integrated filter)
e Energy label
NOTICE
If the unit is operated with the transportation stay attached, abnormal vibration or
noise may be generated.
The compressor transportation stay must be removed. It is installed under the
compressor leg in order to protect the unit during transport. Proceed as shown in
the figure and procedure below.
1 Remove the nut (a) of the compressor mounting bolt.
2 Remove and discard the transportation stay (b).
3 Re-install the nut (a) of the compressor mounting bolt and tighten to
10.1 N•m of torque.
1×
2×
c d
1× 1×
ENERG Y IJA
IE IA
4 About the box
|
e
1×
ENERG Y IJA
IE IA
Installer reference guide
23