Daikin EAVH16S23DA6V Installer's Reference Manual page 124

10 | Configuration
Installer reference guide
124
Schedule
Indicate if the temperature of the leaving water is defined according to a schedule
or not.
Influence of the LWT setpoint mode [2.4] is as follows:
▪ In Fixed LWT setpoint mode, the scheduled actions consist of desired leaving
water temperatures, either preset or custom.
▪ In Weather dependent LWT setpoint mode, the scheduled actions consist of
desired shift actions, either preset or custom.
# Code
[2.1] N/A
Heating schedule
Define a heating temperature schedule for the main zone via [2.2] Heating
schedule.
See "10.3.7 Schedule screen:
Cooling schedule
Define a cooling temperature schedule for the main zone via [2.3] Cooling
schedule.
See "10.3.7 Schedule screen:
Setpoint mode
Define the setpoint mode:
▪ Fixed: the desired leaving water temperature does not depend on the outdoor
ambient temperature.
▪ In WD heating,
temperature:
- depends on the outdoor ambient temperature for heating
- does NOT depend on the outdoor ambient temperature for cooling
▪ In Weather dependent mode, the desired leaving water temperature depends
on the outdoor ambient temperature.
# Code
[2.4] N/A
When weather dependent operation is active, low outdoor temperatures will result
in warmer water and vice versa. During weather dependent operation, the user
can shift the water temperature up or down by a maximum of 10°C.
Heating WD curve
Set weather-dependent heating for the main zone (if [2.4]=1 or 2):
Schedule:
▪ 0: No
▪ 1: Yes
4
Example" [ 110].
Example" [ 4 110].
fixed cooling mode, the desired leaving water
Setpoint mode:
▪ Fixed
▪ WD heating, fixed cooling
▪ Weather dependent
EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Description
Description
Daikin Altherma 3 H F
4P556070-1A – 2021.09