Daikin EAVH16S23DA6V Installer's Reference Manual page 143

EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09
Value
5~8 Limitation when no actuators. When there is no heating output,
the pump speed limitation is applicable. When there is heating
output, the pump speed is only determined by delta T in
relation to the required capacity. With this limitation range,
delta T is possible and the comfort is guaranteed.
During sampling operation the pump runs for a short time to
measure the water temperatures, which indicate if operation is
required or not.
▪ 5: 90% pump speed during sampling
▪ 6: 80% pump speed during sampling
▪ 7: 70% pump speed during sampling
▪ 8: 60% pump speed during sampling
The maximum values depend on the unit type:
[9-0D]=0
a (kPa)
b (l/min)
[9-0D]=2/6
a (kPa)
[9-0D]=4/8
a (kPa)
a External static pressure
b Water flow rate
Description
[9-0D]=1/5
a (kPa)
[9-0D]=3/7
a (kPa)
b (l/min)
b (l/min)
10 Configuration
|
b (l/min)
b (l/min)
Installer reference guide
143