After Connecting The Electrical Wiring To The Indoor Unit - Daikin EAVH16S23DA6V Installer's Reference Manual

9 | Electrical installation

9.4 After connecting the electrical wiring to the indoor unit

Installer reference guide
100
c Sticker to put on the high voltage wires
d Wires between the relays and X5M (AWG22 ORG)
e Wires between the relays and X10M (AWG18 RED)
2 Connect the low voltage wiring as follows:
3 Connect the high voltage wiring as follows:
4 Fix the cables with cable ties to the cable tie mountings. If necessary, bundle
excessive cable length with a cable tie.
To prevent water ingress to the switch box, seal the low voltage wiring intake using
the sealing tape (delivered as accessory).
Without low voltage cables With low voltage cables
EPGA11~16DAV3(7) + EAVH/X16S18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F
4P556070-1A – 2021.09