Final Checks - Stiga PARK PRO 540 IX Workshop Manual

PARK PRO 540 IX - 740 IOX

1.3.4 Final checks

Removing from pallet
All the above measures shall have been done with the machine standing on the pallet. Now,
loosen the remaining straps and roll off the machine from the pallet.
Fit and adjust accessories.
Test driving
Warning! Do not drive without a work equipment (mover deck) attached. Risk
for turning over.
Drive the machine for a few minutes. Test all the functions. Pay special attention to the safety
functions. If the machine is to be delivered with mower deck or other accessories, fit these
before test driving the machine.
HST oil
Check the oil level in the HST's expansion tank after test driving, and top up if necessary.
Engine oil
Check the oil level in the engine and top up if necessary.
Miscellaneous
Give the machine a general inspection
• Is the machine clean?
• Is there any oil leakage?
• Abnormal noise or rattle?
Receipt
By filling in the guarantee certificate you guarantee that the delivery service has been cor-
rectly conducted.
Remember to make sure that the customer receives all the documentation when the ma-
chine is collected / delivered.
WORKSHOP MANUAL Chapter
1 - General instructions
EDITION Page
2018 6