PARK PRO 540 IX - 740 IOX
6.3 Throttle wire
6.3.1 Dismantling
1. Dismantle the upper and lower front engine
covers. See "Front engine covers" at page 5
in "2 Chassis".
2. Dismantle the outside instrument cover. See
"Instrument covers" at page 10 in "2 Chas-
sis".
3. Cut the holding straps (A) and note their
location for the assembly purpose.
4. Dismantle the lower instrument cover (B) by
loosening its four screws.
5. Loosen the nut at the rear of the engine and
hook off the wire.
6. Push out the choke wire and the throttle wire
from the holder atthe articulating point.
WORKSHOP MANUAL
Chapter
6 - Control Wires
EDITION
Page
2018
5