PARK PRO 540 IX - 740 IOX
1.5 Oil and filter
For information about oil- and filterdata for the engine and for the transmission, see the own-
ers manual delivered with the machine. See also section 4 in this manual.
1.6 Technical specifications
For information about the technical specifications, see the owners manual delivered with the
machine.
1.7 General tightening torque
Unless otherwise stated, the following tightening torque are applicable for screws and nuts
on the machine:
Tightening torques :
WORKSHOP MANUAL
Thread
M5
M6
M8
M10
Chapter
1 - General instructions
Torque
5,7 Nm
9,8 Nm
24 Nm
47 Nm
EDITION
Page
2018
13