Electronic Board - Stiga PARK PRO 540 IX Workshop Manual

PARK PRO 540 IX - 740 IOX

7.3 Electronic board

Note! The electronic card is connected to the system by means of connectors CN1,
CN2 and CN3.
The connectors are divided into two parts, the electronic card side and the wiring
side.
E.g.: connector CN1 is divided into (A) for the electronic side and (B) for the wiring
side.
The connector CN1 of the wiring is fitted with a lug (C) which locks it onto the female
connector on the electronic card.
WORKSHOP MANUAL
CN1
C
Chapter
7 - Electrical System
B
CN2
A
EDITION
2018
CN3
Page
6