Covers; Front Engine Covers - Stiga PARK PRO 540 IX Workshop Manual

PARK PRO 540 IX - 740 IOX

2.3 Covers

2.3.1 Front engine covers

Upper front cover
The upper front engine cover has to be re-
moved in the following cases:
• Access to the battery.
• Access to the fuses.
• Removing of the lower case.
Dismantle the front upper cover as follows:
1. Loosen the two bayonet sockets, release the
handle and fold back the upper cover. See
the owners manual.
2. Unscrew 4 screws at each side. See the fig.
Use a 4 mm allen key.
Warning! Petrol is highly inflam-
mable. Never smoke when han-
dling petrol. Never remove the filler
cap while the engine is running or
still warm or when hot objects are
present.
3. Remove the fuel cap.
4. Lift up and remove the cover.
5. Assemble the fuel cap.
6. Assemble the cover in the reverse order.
Lower front cover
The lower front engine cover has to be removed
among others in the following cases:
• Access to the steering cylinder.
• Access to wires and hoses.
• Access to the tank attachments.
Dismantle the front lower cover as follows:
1. Remove the upper front cover. See above.
2. Unscrew 1 screw at each side. Use a 4 mm allen key and preferably a mirror to locate the
screws. See the fig.
WORKSHOP MANUAL Chapter
2 - Chassis and body
EDITION Page
2018 5