PARK PRO 540 IX - 740 IOX
6.1 Description
All wires consist of a wire and a conduit. In
the wire ends one part, the wire or the con-
duit, is fastened to the body and the other
part to a lever. The levers are connected to
the operator control and to the controlled
device.
The wires are also in most cases fitted with
adjustments sleeves withlocking nuts or
angle links at one or both ends.
A. Rod
B. Wire with conduit
C. Fastening to body
D
Lever
E
Spring
F.
Elbow link
WORKSHOP MANUAL
Chapter
6 - Control Wires
To transfer higher forces and both pushing
and traction forces, rods are used,
Maintenance of wires:
Drop a little engine oil or lubricating spray
in the ends of the control wires two or three
times a year..
EDITION
Page
2018
2