PARK PRO 540 IX - 740 IOX
1.1 Introduction
1.1.1 Responsibility declaration
In spite of the great care we have taken there may be errors in this publication.
The author cannot be made liable for incorrect or missing information.
STIGA reserves the right to regularly change product specifications without prior notice. All
the information in this book isbased on the information available at the time of production.
Illustrations and photographs may be arranged schematically, which implies that one picture
may cover several models and therefore not correspond exactly with all models.
1.1.2 How this manual is used
To make this manual easy to understand we have divided the machine into its main systems
and components. These parts are now the different chapters in the book.
Each chapter is divided up into sections.
In each chapter there is a detailed table of contents so that you can easily and quickly find
what you are looking for.
Always check that you are reading the right chapter for your particular machine before start-
ing the repair work.
1.1.3 Abbreviations
The following abbreviations are used in this manual:
HST Hydrostatic Transmission
1.2 Safety Precautions
This manual has been written primarily for trained mechanics working in a well-equipped
workshop.
A basic knowledge of repairs, tools and repair instructions is, however, always a prerequisite
for first-rate results.
A qualified mechanic should always be consulted if the owner does not have sufficient
knowledge to carry out repairs.
During the warranty period all service must be carried out by an Authorised Workshop for the
warranty to be valid.
The following basic points should be observed if the machine is to function perfectly:
•
Follow the service schedule.
•
Be on the alert for sudden vibrations or abnormal noise to avoid major breakdowns.
•
Always use Genuine Spare Parts
•
Follow the descriptions in this manual carefully. Do not take any short cuts.
WORKSHOP MANUAL
Chapter
1 - General instructions
PTO Power Take Off
EDITION
Page
2018
2