PARK PRO 540 IX - 740 IOX
Contents in this chapter
General
All the manoeuvring functions are incorporated on the control panel. This is an excellent
solution in terms of ergonomicsand comfort. It also simplifies the service work since all the
controls and adjustments can be accessed in one place.
All mechanical control movements from the operator to the respective device on the ma-
chine are conducted by wires and in some cases with rods.
This chapter gives a brief description of the equipments and describes their repair and re-
placements.
WORKSHOP MANUAL
6 - Control Wires
Chapter
6 - Control Wires
EDITION
Page
2018
1