Electrical System - Stiga PARK PRO 540 IX Workshop Manual

PARK PRO 540 IX - 740 IOX
Contents in this chapter
7.1 Description ....................................... 2
7.2 Troubleshooting ............................... 3
7.3 Electronic board .............................. 6
7.3.1 Electrical diagram Park PRO -
Honda Engine ........................................ 7
7.3.2 Electrical diagram Park PRO -
Briggs & Stratton Engine ....................... 8
7.4 Electrical safety check .................... 9
7.4.1 Operation check ........................... 9
General
The electrical system has two main duties, to maintain the machine safety and to make the
different functions easy to handle.
The main part of this chapter consists of trouble shooting of the electrical system to isolate
faults and to give information about corrective measures. The electrical system is also de-
scribed. There are also given instructions about general repair and replacement proce-dures.
Note! Faulty electrical cards must always be replaced without attempting to repair
them or replace the individual components.
Note! Many of the checks described in this chapter involve intervention on connectors
CN1, CN2 and CN3; to reach them, remove the external dashboard casing.
* IIn this chapter, the indication "operator seated or (present)" means the operator is in the
driving seat, whereas "without operator or (absent)" means the driving seat is not occu-
pied.
WORKSHOP MANUAL

7 - Electrical system

Chapter
7 - Electrical System
7.5 Hermetic battery care and
maintenance ................................... 14
7.5.1 Battery replacement ................... 15
7.6 Board replacement ........................ 16
7.7 Diagnostic Tool .............................. 17
7.8 Set Zero Tilt .................................... 17
7.9 Check and replace the main power
cord ................................................. 18
7.9.1 Protection sheath assembly ........ 18
EDITION Page
2018 1