PARK PRO 540 IX - 740 IOX
7.7 Diagnostic Tool
The machine is fitted with an 8-pole connector (A) for connection to the Diagnostic Tool.
This device together with the programmer (B) code 1134-9185-01, can perform the following
functions:
B
Cod. 1134-9185-01
For further information see:
https://stiga.ev-portal.com/LogIn/Stiga
http:/ www.gggpartsandservice.com ==> Service ==> Software ==> STIGA - Diagnostic Tool
7.8 Set Zero Tilt
WORKSHOP MANUAL
A
Push the button "HIGH GRASS DOWN" and "REAR RAKE UP"
together, after urn ON the key and after 5 seconds in the dis-
play it will appear the message "TILT SAVED".
Chapter
7 - Electrical System
1.
Software updates of the electronic
cards;
2.
Diagnostics section to perform dis-
play testing and to check the keypad
and control seat switch;
3.
Access to data recorded on the elec-
tronic board (service hours, number
of engine start-ups, number of bat-
tery warnings, max. revs reached by
the engine, hours of use on slopes
exceeding 10°, etc.);
4.
Transfer of data recorded on one
electronic card to another (useful
when the electronic card has to be
replaced).
EDITION
Page
2018
17