Analyzer Status: Diagnostics Values: (Paramagnetic) O2 Sensor; Analyzer Status: Diagnostics Values: H2S Sensor; Diagnostics: Diagnostic Values: Pressure And Temperature - Siemens ULTRAMAT 23 Series Equipment Manual

Continuous gas analysis
Hide thumbs Also See for ULTRAMAT 23 Series:
Table of Contents

Advertisement

8.1.2.4

Analyzer status: Diagnostics values: (Paramagnetic) O2 sensor

Sensorsig:
O2
8.1.2.5

Analyzer status: Diagnostics values: H2S sensor

Sensorsig.:
H2S
Inst.Date:30.11.2012
Inst.Curr.:
8.1.2.6

Diagnostics: Diagnostic values: Pressure and temperature

Pressure sens. diagn
Temperature of IR
Temperature of LCD
Temperature of UV
Pressure ADC:1.778 V
Pressure amb. air:
1011 mbar
Temperature of IR
chamber:
ULTRAMAT 23
Equipment Manual, 04/2022, A5E37100388-012
This dialog displays the diagnostics values of the paramagnetic
1339 mV
oxygen sensor (option). Meaning:
: 20.77 %
• Sensorsig is the current voltage of the O
• O
sible here
This dialog displays the diagnostics values of the optional H
884 nA
sensor. Meaning:
: 0.78 vpm
• Sensorsig. is the actual current of the H
500 nA
• H
ues are also possible here.
• Inst. date is the installation date of the H
tion Calibration: H2S sensor: Defining the installation
(Page 121))
• Inst. cur is the pressure-compensated current per vpm H
the sensor when it was installed.
8123
81231
41.1 °C
81232
is the current oxygen value. Negative values are also pos‐
2
S is the current H
S measured value in vpm. Negative val‐
2
2
This dialog shows various diagnostic values for pressure
and temperature.
The parameters for the IR measurement and UV measure‐
ment are shown in the adjacent screen. Depending on the
device version, one of these two options might be omitted.
You can select between the following parameters:
• Pressure sensor
This dialog displays the diagnostic values of the pres‐
sure sensor (see section Calibration: Pressure sensor
(Page 124)). The displayed values have the following
meaning:
– ADC pressure is the actual voltage of the pressure
sensor measured at the output of the A/D converter.
– Air pressure is the actual atmospheric pressure in
mbar.
• IR sample chamber
The temperature of the first IR detector is shown here.
Functions
8.1 Diagnostics
sensor in mV
2
S
2
S sensor in nA
2
S sensor (see sec‐
2
S of
2
109

Advertisement

Table of Contents
loading

Table of Contents