Analyzer Status - Siemens LDS 6 Operating Instructions Manual

Main menu item (section)
5.2.4
Parameters (code 1)
5.2.5
Configuration (code 2)
1* Analyzer-specific functions.
2* Channel-specific functions.
3* Component-specific functions.
Some of the existing functions in other Siemens analyzers are not present in LDS 6, thus some
function numbers may be missing in the preceding table.
4.3.2

Analyzer status

Table 4-2
Analyzer Status Ch1 NH
1 Analyzer Configuration
2 Diagnostics Values
3 Logbook
4 Display Meas. Range
LDS 6
Operating Instructions, 01/2022, A5E00295894-10
Function Function designation
number
50 Response Time
51 Limits
52 Transmission
53 Status Messages
55 Select Display Digits
56 LCD Contrast
58 Date/Time
60 Setup Logbook
70 Analog Output
71 Relay Outputs
72 Binary Inputs
73 Communication
74 Reset
75 Save/Load Data
77 Store Analog Output
79 Codes Input Levels
81 Select Language
80 Analyzer Test
82 Pressure Correction
83 Temperature Correction
84 Water Correction
85 Path Length
86 Unit
87 Dry Gas On/Off
88 Error On/Off
89 Ethernet On/Off
This display appears when pressing the first soft key ("Analyzer Status"), following the selection of
3
the diagnostics functions in the main menu.
The status functions are freely-accessible. You will not be asked to enter a password.
Operation
4.3 Analyzer functions
1* 2* 3*
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
43