Diagnostics: Diagnostic Values: Uv - Siemens ULTRAMAT 23 Series Equipment Manual

NO
CO
SO2
T:
Raw values
NO
CO
SO2
8.1.2.2

Diagnostics: Diagnostic values: UV

UV diagnostic values
O2 diagnostic values
P and T values
Other diagn. values
Choose component
: SO2
Diagnostic
Calibration values
Check opt. alignment
ULTRAMAT 23
Equipment Manual, 04/2022, A5E37100388-012
V(T): 440206
V(T): 505577
V(T): 494135
42.2°C TS:
81212
: 1.99 %
: 0.27 %
: 5.08 %
1
SO2
8126
• V-ADUt are voltage and signal values of the analog-to-digital
converter following temperature compensation.
T in the bottom line corresponds to the temperature of the
analyzer unit, TS to the temperature of the first IR source
(since 2019 IR sources always come with a temperature sen‐
sor, therefore, for new U23 units with IR, temperature is al‐
ways displayed or "*****" in case of error).
• Raw values are the measured values in % of the full-scale
value (= 100%).
This menu screen appears in the following cases:
• The analyzer has no IR detector, otherwise UV/IR diagnostic
values appear in the upper line
After selecting the UV diagnostic values:
Here you must first identify the UV component to which the
diagnostic values should apply.
After the <ENTER> key is pressed, the following selection menu
appears:
Once you have selected the relevant component, the adjacent
screen appears with further selection parameters.
Functions
8.1 Diagnostics
107