User Prompting - Siemens ULTRAMAT 23 Series Equipment Manual

Operation

7.2 User prompting

7.2 User prompting
In the next sections, operation of the ULTRAMAT 23 is explained according to the following
scheme:
_____________________________________________________________________________
_____________________________________________________________________________
Figure 7-1 User prompting
The heading of the respective section indicates the complete menu path, starting from the main
menu, on which the shown display can be reached (see section Display and control panel
(Page 89)). The various menu levels are separated from one another by colons.
The display, as it appears on the analyzer, is shown to the left of the text. The accompanying text
explains the display, including inputs and instructions if necessary, e.g.:
• You can start the function using the <ENTER> key.
• You can terminate the function using the <ESC> key.
You can recognize the position of the cursor in the display in these instructions in that the
corresponding character is printed in bold type and underlined (in this display: Example).
The number on the right below the display, (12345 in this case) is used as a cross-reference to
the summaries of all menus and dialogs which precede sections Diagnostics (Page 101) to
Configuration (Page 133) in order to facilitate the locating of the described display in these
overviews. A reference may be made that the respective function is protected by a code level
(see section Code levels (Page 95)) or is specific to a component. In the case of functions
specific to a component, you must enter the measured components (up to four) for which you
wish to call the respective function.
88
Equipment Manual, 04/2022, A5E37100388-012
ULTRAMAT 23