Safety instructions
2.1 General
2.1.2
Information on industrial use
NOTICE
Use in home environment
This Class A Group 1 device according to CISPR 11 is intended for industrial use.
If used in homes, the device may cause radio interference.
NOTICE
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Incorrect disassembly
The following risks may result from incorrect disassembly:
- Injury through electric shock
- Risk through emerging media when connected to the process
- Risk of explosion in hazardous area
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched off all physical variables such as
• If the device contains hazardous media, it must be emptied prior to disassembly. Make sure
• Secure the remaining connections so that no damage can result if the process is started
16
WARNING
pressure, temperature, electricity etc. or that they have a harmless value.
that no environmentally hazardous media are released.
unintentionally.
Equipment Manual, 04/2022, A5E37100388-012
ULTRAMAT 23