Table of Contents
Advertisement
Telemetry : Altitude
Altitude is a screen which displays / sets up the altitude
alarm. Warning by vibration can also be chosen. Data when
altitude which changed from there. Even if the altitude of an
from an airfield is displayed. This sensor calculates the
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
indicates the alarm
will sound when the
altitude reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
altitude reaches below
your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
First, the set of a reference is required.
*Atmospheric pressure is changed according to the weather
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
＜ Linkage menu ＞
100
*An altitude sensor or GPS sensor must be installed in the aircraft.
altitude from atmospheric pressure. Atmospheric pressure
will get lower as you go up in altitude. Using this, the
sensor will estimate the altitude. Please understand that an
pressure changes in a weather situation.
*Only receiver voltage and EXT voltage can be used in
Allows Melody to be
turned ON or OFF.
Alarm set : Altitude
functions.
Sets the altitude
on which the alarm
operates.
● If this is set to Mode1-4,
m
≧
*When the screen is tapped for one second, the rate is reset
to the initial value.
Altitude
a rise and dive are told
by a different melody.
Mode1: Little rise/dive
→ Melody changes
: sensitively
Mode4: Big rise/dive
→ Melody changes
: insensible
t
Advertisement
Table of Contents
