FUTABA 16SZ Instruction Manual page 12

18-channel digital proportional r/c system
Table of Contents

Advertisement

Optional Parts
• HT5F1800B transmitter battery pack - the (1,800mAh) transmitter NiMH battery pack may be easily
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by
placing the instructor on a separate transmitter. Note that the T16SZ transmitter may be connected to
• Servos - there are various kinds of servos. Please choose the Futaba servos that best suit your model and
used if "FASSTest12CH mode" is used.
• Telemetry sensor - please purchase an optional sensor, in order to utilize bidirectional communication
system and to acquire the information from a model high up in the sky.
 
• Neckstrap - a neckstrap may be connected to your T16SZ system to make it easier to handle and improve
• Y-harnesses, servo extensions, hub,etc - Genuine Futaba extensions and Y-harnesses, including a heavy-
• Gyros - a variety of genuine Futaba gyros is available for your aircraft or helicopter needs.
FASSTest and FASST, T-FHSS, S-FHSS types are available.)
• SBD-2, S.BUS decoder -The SBD-2 is a converter for using conventional servos (other than an S.BUS
system and eight servos can be used. SBD-2 can change the output CH by selecting from 9 groups using
The following additional accessories are available from your dealer.
Refer to a Futaba catalog for more information:
  magnet type : SBS-
 
< Before Use >
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

T16szFut01004355-3

Table of Contents