FUTABA 16SZ Instruction Manual page 176

The various functions used in the T16SZ can be selected by switch. The switch (including when stick,
trim lever, or VR are used as a switch) setting method is common to all functions.
Switch selection
When a switch is selected at a mixing function, etc., the selection screen shown below is called.
When switch is selected
Switch ON/OFF setting is possible at each
position.
Normal or Alternate: Alternate switching
mode is available depending on mixing
function.
When stick, trim lever, or VR is selected.
When a stick, trim lever, or VR is used as a
switch, the following 4 modes can be selected.
Next page
Tap the chosen
switch.
＜ Data ＞
177