Table of Contents
Advertisement
Model select
This function is used to load the settings of the
The settings may be selected from either the
memories are available in the transmitter.
The name of the model stored in the transmitter
and the SD card may be changed. This can be very
useful to tell different models settings apart. Each
the model name always appears in the display
＜ or ＞
● Tap the [Model select]
b u t t o n i n t h e H o m e
screen to call the setup
screen shown below.
Current model is
green.
Model addition
screen.
The Copy function is used to copy one set
of model data into a second memory within the
transmitter and the SD card. It may be used for
getting a head-start on setting up models with
make a backup copy of a model setup before any
changes are made.
*The added model is displayed in the model list.
*When a model is added, a receiver link is required.
＜ Linkage menu ＞
● When model data on
a SD card is used, this
icon appears.
● "Save to"
[Internal]: transmitter
memory
[SD card]: SD card
67
Advertisement
Table of Contents
