FUTABA 16SZ Instruction Manual page 107

Telemetry : GPS [Speed]
The speed screen displays and sets the speed data from an
air speed. Consequently, with a head wind, the displayed
speed decreases and with a tail wind, the displayed speed
increases.
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
indicates the alarm
will sound when the
speed reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
speed reaches below
your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
Alarm setting when speed increases
≧
*When the screen is tapped for one second, the rate is reset
to the initial value.
＜ Linkage menu ＞
108
*A GPS sensor must be installed in the aircraft.
*Only receiver voltage and EXT voltage can be used in
Reference and Distance mode work in conjunction with Distance
discussed on the previous two pages.
t
*Speed alarm precaution
and connect the sensor in accordance with the sensor
instruction manual.
functions.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Speed
Sets the speed on
which the alarm
operates.