FUTABA 16SZ Instruction Manual page 155

Setting method
Curve setting examples
The screens shown below are curves created
by entering the pitch rate at low, center, and high
side (3 points or 5 points) at each condition. When
the fuselage (or the reference value).
Normal Curve
156 ＜ Model Menu (Helicopter Functions) ＞
Idle-up 1 Curve Idle-up 2 Curve
Pitch servo speed setting
(For a description of the setting method, see the
description at the back of this manual.)
*For a description of the curve setting method, see the
description at the back of this manual.
Hold Curve